If you are looking for a great product, the Sound only, 2 Drill-in/White Sensors Car Backup System (SS2) is worth every penny. Most of the customers are quite happy with the Sound only, 2 Drill-in/White Sensors Car Backup System (SS2).
- 2 Drill-in Stick-on Sensors in white
- Sound alarm changes base on the distance.
- Sound only, no display
- Very easy to install
The system will beep based on the distance of an object behind the car. There is no display unit, so it is very easy to install. The device is only
activated when the driver puts their vehicle into reverse. Two ultrasonic sensors mount on your bumper. A drill bit for the size of the sensor is
included.
Installation
Step 1: Connect the Electric Power
* Open the trunk, find the wires to the back light housing.
* Use of a 12 volt multi-meter, Probe the appropriate wiring harness which heads toward the reverse light connector of the vehicle, looking for the
wire which carries 12 volts + when reverse gear is engaged, and no voltage when reverse gear is disengaged. Never use a test light to probe wires.
* Using a quick connector (included) to connect the reverse light power wire (+12) with the RED wire from the control center. You do not need to
cut any wire.
Step 2: Install the Backup Sensors
* Drill two holes in the bumper via provided drilling bit.
* Install the insert-style sensors in the bumper.
* Run the wires of sensors into the trunk, and plug in the control center.
* Connect the power line of control center with the power line of backup light
Sound only, 2 Drill-in/White Sensors Car Backup System (SS2)
For more details, please follow the link above and find the best offers for you.
